Search
Close this search box.

ELPECAST® casting compounds

ELPECAST® casting compounds protect and insulate electronics, sensor technology and lighting electronics against extreme weather conditions and aggressive media. A large variety of transparent and opaque products fulfills numerous individual requirements and customer requests.

a large variety is available in terms of viscosity, colours, processing time and pot life; numerous hardness and elasticity adjustments cover the full range of shore hardness; good resistance against water, moisture, lyes, acids and many chemicals; elastic adjustments are a low-cost alternative for silicone casting compounds

ELPECAST® Wepuran VT 3402 KK series

  • crystal-clear and highly transparent
  • very high optical transparency with low optical damping
  • very good weather resistance, extraordinary UV light stability and good thermal resistance
  • for outdoor use or underwater applications, in flexible LED strips, aluminium profiles and more
  • transparent colouring by dyestuff concentrates
  • an even light diffusion effect can be realised with the ready-to-use hazy casting compounds VT 3402 NV-H/1 to H/4, the opaque top coat VT 3492 LS or the hazing paste
  • auxiliary products recommended: Accelerating Agent B 4402, adhesion promoter AP 4 LED, sealing mastic EH 13.271, mould release agent EH 13.650, cleaning agent R 13.780

ELPECAST® Wepuran VT 3406

  • colourless transparent with good weather resistance and UV light stability
  • for moderate demands on optical properties, e.g. for encapsulating assemblies that must remain permanently visible
  • low-viscous (good flowability)
  • highly elastic, easy to remove for repair purposes
  • auxiliary products recommended: Accelerating agent B 4400, adhesion promoter EH 13.950, sealing mastic EH 13.271, mould release agent EH 13.650, cleaning agent R 13.780

ELPECAST® Wepuran VT 3407

  • very low-viscous (particularly flowable)
  • opaque in thick layers
  • high mechanical resistance
  • auxiliary products recommended: Accelerating agent B 4400, adhesion promoter EH 13.950, sealing mastic EH 13.271, mould release agent EH 13.60, cleaning agent R 13.780

ELPECAST® Wepuran VU 4444/31 SB-WB / VU 4494/31 SB-WB

  • elastic
  • very good weather resistance and UV light stability, no loss of gloss
  • high yellowing resistance of the white adjustment
  • auxiliary products recommended: Accelerating agent B 4402, adhesion promoter EH 13.950, sealing mastic EH 13.271, mould release agent EH 13.650, cleaning agent R 13.780

ELPECAST® Wepuran VU 4451/51 SB

  • low-viscous (good flowability)
  • elastic
  • auxiliary products recommended: Accelerating agent B 4400, adhesion promoter EH 13.950, sealing mastic EH 13.271, mould release agent EH 13.650, cleaning agent R 13.780

ELPECAST® Wepuran VU 4452 series

  • highly elastic
  • relatively high temperature resistance; low-cost alternative for silicone casting compounds
  • auxiliary products recommended: Accelerating agents B 4400 / B 4402, adhesion promoter EH 13.950, sealing mastic EH 13.271,

ELPECAST® Wepuran VU 4452/41 SV-HF

  • high mechanical resistance
  • complies with hazard level 3 of the railway standard EN 45545-2:2013 (oxygen index (OI) of 51 % in acc. with ISO 4589-2:2006)
  • auxiliary products recommended: Adhesion promoter EH 13.950, sealing mastic EH 13.271, mould release agent EH 13.650, cleaning agent R 13.780

ELPECAST® Wepuran VU 4453 series

  • highly elastic
  • very low water absorption
  • various viscosities, pot lives and shore hardnesses
  • thixotropic adjustment for dam-and-fill applications / dispensing
  • VU 4443/92 WR-NV fulfils the requirements of IEC 60079-0, section 26.10 “Resistance to UV light”
  • VU 4453/71 HE-T is recognized by UL as polyurethane adhesive in category QOQW2 „Polymeric Adhesive Systems, Electrical Equipment – Component“ (File E501223)
  • water resistant adjustments for underwater applications
  • auxiliary products recommended: Accelerating agent B 4400, adhesion promoter EH 13.950, sealing mastic EH 13.271, mould release agent EH 13.650, cleaning agent R 13.780

ELPECAST® Wepuran VU 4457 series

  • “allround” casting compounds for many different fields of application
  • various viscosities and pot lives
  • high mechanical resistance
  • auxiliary products recommended: Accelerating agent B 4400, adhesion promoter EH 13.950, sealing mastic EH 13.271, mould release agent EH 13.650, cleaning agent R 13.780

ELPECAST® Wepuran VU 4459/41 SV-HF series

  • high mechanical resistance
  • auxiliary products recommended: Adhesion promoter EH 13.950, sealing mastic EH 13.271, mould release agent EH 13.650, cleaning Agent R 13.780

highly elastic, easy to remove for repair, dielectric properties are almost constant over wide temperature/frequency range, outstanding chemical and weather resistance, addition crosslinking, very low heat development and very low shrinkage pressure when cured

ELPECAST® Wepesil VT 3602 KK

  • highly transparent even in thick layers
  • high optical temperature resistance
  • outstanding weather resistance and UV light stability
  • auxiliary products recommended: Adhesion promoter G 4660, sealing mastic EH 13.271, cleaning agent R 13.780

ELPECAST® Wepesil VU 4675

  • good flowability
  • particularly good thermal conductivity (approx. 1.2 W/mK) due to ceramic fillers
  • auxiliary recommended: Adhesion promoter G 4660, sealing mastic EH 13.271, cleaning agent R 13.780

ELPECAST® Wepesil VU 4691 E series

  • highly viscous
  • good thermal conductivity (approx. 0.7 W/mK)
  • withstands short-term loading of up to 250 °C
  • auxiliary products recommended: Adhesion promoter G 4660, sealing mastic EH 13.271, cleaning agent R 13.780

ELPECAST® Wepesil VU 4694 E

  • good flowability
  • good thermal conductivity (approx. 0.8 W/mK)
  • withstands short-term loading of up to 250 °C
  • auxiliary products recommended: Adhesion promoter G 4660, sealing mastic EH 13.271, cleaning agent R 13.780
 

high mechanical resistance, excellent resistance against water, moisture and aggressive media, outstanding adhesive strength

ELPECAST® Wepox VT 3000

  • low-viscous (good flowability)
  • transparent even in thick layers
  • auxiliary products recommended: Adhesion promoter EH 13.950, sealing mastic EH 13.271, mould release agent EH 13.650, cleaning agent R 13.780

ELPECAST® Wepox VU 4085 series

  • low-viscous (good flowability)
  • long processing time/pot life
  • good thermal conductivity
  • auxiliary products recommended: Adhesion promoter EH 13.950, sealing mastic EH 13.271, mould release agent EH 13.650, cleaning agent R 13.780

Featured

ELPECAST Selection Chart

Download product selection chart (PDF)

Testing Lab

Find out about our product testing service

Neuauflage des Fachbuchs

"Beschichtungsstoffe für die Elektronik - Schutzlacke und Vergussmassen"

Contact us for details

ELPECAST® casting compounds

Sample request